Garment laser cutting machine technology is how to deal with the burr problem
Garment laser cutting machine technology is how to deal with the burr problem, and some customers in the use of clothing laser cutting machine processing sheet metal, cut out the workpiece effect is very unsatisfactory, and burr is very much, and then many customers began to suspect clothing laser cutting machine Product quality problems, it is not true. Clothing laser cutting machine processing sheet metal glitches are the reasons for what, here we give you a simple analysis. Clothing laser cutting machine processing sheet metal appears the main reason for the burr; when the clothing laser cutting machine in the processing of the workpiece, the laser beam irradiation surface of the workpiece to produce high energy so that the surface of the workpiece quickly vaporized, and evaporation, to achieve the purpose of cutting. But here there is a core device, we must pay attention to is the auxiliary gas. The auxiliary gas is the slag that blows off the surface of the workpiece after gasification of the workpiece. If the auxiliary gas is not used, the slag is cooled and the burrs are formed on the cutting surface. This is the main reason for the formation of burrs.
Another reason is the quality of the equipment itself, there is the parameter setting factors, all when the customer in the purchase of clothing laser cutting machine, be sure to professional equipment debugging good equipment. The following are the same as the ones,
Clothing laser cutting machine Garment laser cutting machine processing sheet metal appears burr solution;
1. Be sure to equip the air compressor with auxiliary gas for cutting.
2. Find a professional operator to adjust the laser cutting machine parameters until normal.
We're Here to Help