Home > News > Content
How Is The Laser Cutting Machine In The Summer?
Jul 19, 2017

  How is the laser cutting machine in the summer?

  In summer due to the temperature rise, air humidity. The so-called sharpening workmanship, laser cutting machine's scientific maintenance not only to avoid some minor failures, laser cutting machine improve cutting efficiency, but also improve the life of some accessories.

  One, to avoid condensation

  1, the cooling water temperature does not differ greatly from the air temperature. Laser cutting machine laser and optical lenses are used in the water cooling method, because the air in the cold water will condense into water, when the cooling water temperature is lower than room temperature 5-7 degrees, the laser and optical lens surface will be exposed Condensation, to a large extent affected the laser light efficiency and optical lens light transmission, the laser energy and optical accessories have a great impact on life. Laser and cutting head multi-part of the use of separate water cooling recommended users set the laser low temperature all the way to set the water temperature of 26 degrees, cutting head and fiber all the way to about 30 degrees (depending on temperature and humidity), strictly follow the summer switch machine sequence.

  Warning: the laser can not be turned off, the water cooler is still running!

  Hot and humid weather will make laser power and laser equipment in various parts of the wet or condensation, which led to a variety of failures, which seriously affect the user's normal production. Due to the above causes of failure, does not belong to the normal warranty.


  1, in the laser device shutdown when the water cooling machine should also be closed to prevent the temperature is too large and lead to downtime caused condensation;

  2, strongly require the integration of the operating room customers to install air conditioning or laser installed in the air-conditioned room, laser cutting machine and can maintain air-conditioning continuous and stable operation (including the evening) to keep the indoor temperature and humidity, or each time the boot, open the air conditioning operation half After the hour and then open the laser device power and water cooling machine.

  Second, the maintenance of cooling system cooling water

  Summer temperature rise, the laser cutting machine cooling system working pressure increases, it is recommended to check the temperature before the arrival of the internal cooling machine maintenance presses, laser cutting machine different manufacturers of equipment pressure is not the same, it is recommended before the consultation equipment manufacturers specific parameter.

  Due to the high temperature, the deterioration rate of cooling water will be accelerated. It is advisable to use regular distilled water or pure water to clean up the water tank and replace the water and the filter element (it is recommended that the replacement period should not exceed 15 days), so as not to cause the laser and pipe Scale affect the cooling water flow caused by high temperature alarm, clean up the scale of the equipment manufacturers under the guidance of the operation.

  Third, rail maintenance

  The rails should always be cleaned to remove dust and other debris, ensuring that the equipment is partially lubricated and free of debris. laser cutting machine Regular cleaning and on the oil, to ensure that the machine can be carried out in the accurate positioning to achieve more accurate cutting, improve product quality.

  Fourth, the control cabinet

  As the laser cutting machine dust is mainly metal powder, it is recommended to regularly clean the laser cutting machine electrical cabinet dust and check the working conditions of the cooling fan.

We're Here to Help

  • 0086 21 61530116
    0086 21 61530116
    Rm 628, No.39, Lane 1500, Meijiabang Rd, Songjiang District, Shanghai, China


Enter in your email address to receive deals
and coupons.
Bookmark us today!